Sending your files for CNC production

Use your own software and design skills

For the busy sign maker the ability to get precise results from existing design files is very important.

With our service you are in control. you use your own design software to dictate precisely what is needed.

Get your CNC products as simply as possible.

Just design your sign and separate out those parts you need to be produced with CNC.

Send an email to us with a file attachment and that's all you really need to do.

It is as simple as exporting your file to your own production equipment- the only difference is you email the file rather than save it to your disk;

Design your sign project
Separate out the components to be made with CNC
Export these parts as a DXF or Corel, SignWizard or EPS file
Fire up outlook and send us an email with the file attached.

That's the whole process- four simple steps

Do you have to measure each letter to tell us the height?

No. Just email us over what you need and we will run the file through our special material optimising software and give you the best price.

Most other CNC suppliers want you to measure the letters and list them on a fax. Some others will only take one file format. Forget all this- just send the file you want us to cut- we'll do the rest.

An extension of your existing production systems

You can think of our service as just another piece of production equipment which you simply send files to.

The only real difference is you don't have to buy the equipment or pay for the staff to run it.

You just pay for what you want when you need it.

You save time, you save money

Not having to work with a set list of typefaces, not having to check all the letter heights, not having to total everything and not having to check orders and confirmations back and fro saves you time which saves you money.

We also cut logos as standard so there is no nasty extra charges.

You get everything that's in your design file for one great price.

Why would you go anywhere else?

We have carefully looked into the whole sub contract CNC market and we know that we probably offer the best service in the UK.

Not only are we very experience sign makers ourselves we also charge some of the best prices you can get.

With our simple cut from file service we have made the whole outsourcing of CNC work that much easier.

Our CNC service is designed to save you time

One thing that is always in short supply is time. To solve the problem of not having enough hours in the day we have created what we believe is the easiest CNC service available.

Just send one email and sit back while we do the rest- it is that easy.